For those who have a web site or perhaps an web application, pace is vital. The quicker your web site works and the faster your apps perform, the better for you. Since a site is simply a selection of files that connect to one another, the systems that keep and work with these files have an important role in website functionality.

Hard drives, or HDDs, were, right until recent times, the most dependable products for keeping data. Having said that, lately solid–state drives, or SSDs, are already rising in popularity. Have a look at our comparability chart to check out if HDDs or SSDs are more appropriate for you.

1. Access Time

Image

With the release of SSD drives, data access rates have gone through the roof. On account of the brand–new electronic interfaces utilised in SSD drives, the average data access time has shrunk to a record low of 0.1millisecond.

Image

The technology driving HDD drives goes all the way to 1954. And even though it has been significantly polished over the years, it’s still can’t stand up to the inventive concept driving SSD drives. Utilizing today’s HDD drives, the top data file access rate you are able to attain varies somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

Image

Caused by the brand–new revolutionary data file storage approach adopted by SSDs, they supply speedier file access speeds and better random I/O performance.

During FileBigo’s lab tests, all SSDs showed their capability to handle at the very least 6000 IO’s per second.

Image

Having an HDD drive, the I/O performance gradually enhances the more you use the drive. However, as soon as it actually reaches a specific limitation, it can’t proceed swifter. And because of the now–old concept, that I/O limit is noticeably below what you might have having an SSD.

HDD are only able to go so far as 400 IO’s per second.

3. Reliability

Image

The absence of moving parts and rotating disks in SSD drives, and also the latest advancements in electric interface technology have led to a considerably risk–free file storage device, with an normal failure rate of 0.5%.

Image

HDD drives use spinning disks for holding and browsing files – a technology dating back to the 1950s. And with hard disks magnetically hanging in mid–air, spinning at 7200 rpm, the chances of anything going wrong are usually higher.

The standard rate of failing of HDD drives varies amongst 2% and 5%.

4. Energy Conservation

Image

SSDs don’t have moving parts and require little or no cooling down power. Additionally, they demand a small amount of electricity to work – tests have indicated they can be powered by a normal AA battery.

In general, SSDs take in somewhere between 2 and 5 watts.

Image

HDD drives are well known for becoming noisy; they are more likely to heating up and in case you have several hard drives within a server, you have to have a further a / c unit exclusively for them.

All together, HDDs take in between 6 and 15 watts.

5. CPU Power

Image

Because of SSD drives’ greater I/O performance, the main server CPU will be able to process data queries faster and preserve time for additional procedures.

The average I/O wait for SSD drives is only 1%.

Image

When using an HDD, you need to dedicate more time waiting for the outcomes of your data file query. As a result the CPU will be idle for much more time, looking forward to the HDD to react.

The common I/O wait for HDD drives is about 7%.

6.Input/Output Request Times

Image

The majority of FileBigo’s completely new servers moved to simply SSD drives. Our personal lab tests have demostrated that having an SSD, the common service time for an I/O request whilst doing a backup stays below 20 ms.

Image

During the very same lab tests with the same hosting server, this time around fitted out using HDDs, overall performance was noticeably sluggish. Throughout the web server backup process, the average service time for any I/O calls fluctuated somewhere between 400 and 500 ms.

7. Backup Rates

Image

Talking about back ups and SSDs – we have discovered an amazing progress in the back up rate since we transferred to SSDs. Today, a regular web server data backup takes solely 6 hours.

Image

In the past, we have got employed mostly HDD drives on our machines and we’re well aware of their functionality. On a web server furnished with HDD drives, a full web server data backup normally takes around 20 to 24 hours.

With FileBigo, you may get SSD–driven web hosting solutions at competitive prices. Our web hosting plans as well as the VPS web hosting contain SSD drives automatically. Apply for an website hosting account with us and observe how your sites will become much better at once.


  • Service guarantees

  •  
  • Sign up today. There aren’t any configuration fees and you will have total SSH/full root access to your server. 99.9% network availability is warranted.
  • Compare our prices

  •  
  • Quickly compare the parameters and capabilities supplied by FileBigo’s Virtual Private Servers. Discover exactly which VPS Web Hosting package will provide you with everything that you will want to handle your multi–media web presence with no trouble.
  • Compare our hosting plans
  • Contact Us

  •  
  • Get in touch with us round the clock by email or by employing the extremely–fast ticketing platform. Our techs are ready to respond to all of your requests within 1 hour.